saabster try increasing your fuel line size.i hav a 350 tuned up to 330hp, increased fuel line to 12mm. runs brillant.
thanks redtech for your advise.manged to sort problem out although i did have to adjust shift cables slightly.
removed bottom casing to replace impeller .i am now having problems getting the gears to engage (f.n.r).tryed putting gear shaft in forword and...
hi manzantia solved the problem .by changing the float neadle,main jet and the acelerator pump piston.hope this helps.saabster
i know bi wouldnt get an exact figure,the engine was 260hp standard.so i was guessing it would now be around 330hp?the heads alone was supposed to...
thanks for the advise .i no its a good idea to keep an eye on the gauges !but an audable back up would be great.thanks for the info. saabster....
can anyone suggest a good eng.temperture warning buzzer.its to go on a mercruiser 5.7 gm '85.(dont want to just rely on temp gauge). any help...
carb prob thanks kenj will have alook. cheers.
hi manzantia did you resolve the problem with the fuel leaking ?,as my rochester has strated doing the same thing!
hi boys and girls. any ideas as to what bhp i will be getting from my 5.7lGM V8 as i have uprated the cylinder heads with large valves 3stage...
just to give you an update,on the carb prob.stripped new carb and fitted larger jets and needles ,changed vacum and replaced with old one.the...
thanks rmsosf will try at the weekend and let you know.
most cabin cruiser exhausts are under the water or very near.you can get a swan neck (water trap one way valve)to stop water ingressing too far up...
hi guys hope you can help.im running a 5.7l chevy in my boat,which i have just put on a rebuilt quadra jet carb.the problem is that it is now...
hi new guy here .hope someone can help.ive just fitted a rebuild quadra jet carb on my 5.7l chevy.i'm now finding it hard start,when it dose start...
