As I posted on Aluminator's thread, I am in the process of restoring a round-chine aluminum boat, a 14' Crestliner Viking 710, 1957. Again, here...
I picked up a 17' Dusky Open Fisherman, and I notice that the front seating area of the center console is actually a fuel tank, 12-14 gallons or...
I recently picked up a nice little center console that has a soft floor, but is in otherwise good condition. One thing I noticed is that the...
I decided to fix a number of little chips in my boat. I mixed the color and the hardener and applied. Everything was looking really good....
I'm replacing the plywood deck of an 18' Glassmaster center console. I know basic fiberglass work, but not much about proper technique. The...
Here are the pictures I promised and a few other notes: Here is a shot of the transom once the motor was removed. [img] You can see all the...
I thought I'd pass this on.... I finally got some time to work on the transom of my 21' Bayliner project boat. This was a boat I got for a...
Greetings All. I've been doing a lot of reading here. My boat, a 21' express cabin, 8'1" beam, definitely needs a transom VERY soon. When the...
(I posted this in the "Materials" forum also. I hope this does not cause confusion.) Greetings, Thanks to everyone for your helpfulness....
Greetings, Thanks to everyone for your helpfulness. There is a lot of experience here! Epoxy resin is highly recommended for saturating...