http://www.youtube.com/watch?v=vX0Myo8HvcE
The idea of building a skin-on-frame kayak has been on my mind for some time. I've been studying the many ways they can go together, the flexible...
I bought this boat last August and sailed her for the last of the season. !4' 11", full long shoal keel, guessing weight at about 1000#,...
Chris Craft inboard, Hercules 236 flathead just rebored .060 over. Engine runs fine, but is blowing hot exhaust from a bolt hole on the...
Just came across some MAS resin and hardener. It was left here by a friend years ago, probably six or seven years old. The resin hasn't any...
I am working on a design for a 27 ft sailing dory. I am thinking of a solid steel centerboard and a center cockpit, under which the centernoard...
Not the best copy, but this sailing rig is one I mentioned once a ways back, before I knew how to do attachments. I also have a model of the rig,...
I'm interested in discovering a simple means to fabricate custom bronze fittings. I would want to use flat and round stock 1/4" or under....
I have modelled this rig, but not experimented with it. The basic plan goes like this: A mainmast penetrates (or is tabernacled) very...
A customer of mine recently ordered screws from a catalog, thinking they were bronze, as the catalog called them "statuary bronze". They looked...