If a small animal such as a cat (of which I have 3) or dog were to consume some of the above mixture it would take a teaspoon and less that 24hrs...
None that I could find in fact the info I have come across is that provided standard painting procedures and prepartion are followed then the...
This is very true Gonzo its not that the boat is rottion alot yet but there is vast evdience that if preventative measures arent taken buring the...
From the information that I have researched about PEG it seem that it wouldnot be suitable as a fungicide in boating use as it is here in...
I forgot to add that the undyed glycol does require a licence and is also nearly 3 times the price. I know wich way I'll be going. I will...
I appreciate both of your concerns. I look at it from the point of veiw that no mater what route I chose weather it be an off the shelf rot killer...
Thanx longliner yes I agree these chemicals are quite toxic to both pland and animal and therefore require some care. There is however a large...
The antiboil/freeze that is available here is dyed green. Does this have any affect of staining wood or paint when applying home made up rot killer?
Thanx for the info Hans very much appreciated Al ;)
I am looking for a suitable softwood or hardwood substitute to Oregon for the extention of my keel and stringers as this is what they are already...
Yes scarf joints were looked at but both I and the engineer agree that with a 1" router bit that the curvature created in shaping the wood and the...
Hi Vic, Below is 4 photos hopefully detailing the construction of the extention and also where Im upto thus far. The first photo is a pic of an...
Thanx Hans I was looking at the Northane range as it is a little cheaper Im not even sure that I have got rot at all after some looking and...
That is a very true statement about vision and imagination there Vic. I have spoken to several marine engineers in the last 2 days and all have...
Thanx for the great replys. After spending yesterday striping paint and removing fittings I have discovered that the transom is good and solid and...
Here is a few pics of my dads 14ft F/G boat that I recently replaced the floor in. I used exterior grade 9mm plywood resin coated on the bottom...
Hi Vic, Yep I sure do, not alot at the moment but more to come as work progresses. These 2 were taken about 2 weeks ago with her sitting where I...
Hi, I have a 16ft ply fishing boat that I recently acuired that I am giving a freshen up. My first question is how long should I dry the boat...
I have recently aquired a 16ft bondwood fishing boat from the early 80's (home built) I also have 20kg of unwaxed polyester resin and around 20m...
