race place 941-505-9005
so lets see if i get this so using a prop caculater for speed you are figuring thrust ? 14x32 cleaver @ 6000 rpm = 145 mph or so giving what...
how would one figure out the trust power of a v 6 outboard say 300 horse power anyone ??
yes sir i just got a reply from apba today they are sending me the lay up schedules they basicly said what you said
are all electric motors 1.1 gear ratio and what would be the trust power of a 2.5 v6 outboard with a 14x26 chopper prop
anyone got the scope for the materials lay up schedules etc apba needs a 4000 newton number i got to build one i was thinking 3/4 24 lb penski...
thats a shame no wonder i have about 3 or so gradys a year in for transum.s i havent seen one of these crown lines yet but i will and that bond...
well im from mo so show me some facts i still dont think pt will hold any resin. and will flex until the glass on the suface lets go thus...
well no matter what any web site or manufature has to say about pt it wont work trust me you are trying to convence your self it was alright to...
must be a hidden message for some one hey
yea ive done some of those things before but more of the good things so far with no real formal training on business i did have business law in...
lol hey that was like a refresher coarse thanks
it dosent matter no one should use it and any builder that is is selling junk 35 years there is no way that any fiberglass will stick to...
i have seen it time and time again over the years it becomes like a slim on the suface which breaks down the glass then more time and it breaks
that boat will need everything rebuilt new stringer,s transum and floor anything 20 years or so old made with a wood core is just about rotten...
due you have pictures of the molds
you need to use way better stuff than wood arora matt core and penski board stringers or a composite of 10 lb density 24 lb for transums...
i did it the old fashion way the smaller boats arent to tuff no major problems and its real fast and can be configured into any kind of purpose...
same question over 30 years in mold fab and repairs whats the housing market like to re locate
lol ok what if the bottom of the steel block had dempels (like a golf ball) would it be higher with or without?
