I have a Sonic prowler with a 500HP and a bravo one outdrive. The boat performs well enough but the way it planes out reminds me of a larger...
Sand the bottom thoroughly with a coarse paper, something like 180 or even 120. Clean the bottom with acetone afterwards. Paint with confidence....
HVLP will work fine and that's the only gun you can use with that small of a compressor. They aren't hard to clean at all once you get used to...
Yes I have cut the floor out of inner liners lots of times. It's a lot easier if you can cut it out in one piece so take some time to make...
Because these hulls are so thin they are very difficult to repair when they are badly damaged. If you want to try to fix it yourself your going...
Oh I just saw your location was in Ohio. I do offer boat transportation in the winter for winter work.
What is the motor and hardware going to cost that you would be removing? I would probably be interested in purchasing this boat for that cost and...
I repaired a Raider last year. The guy ran over a shore station at full speed and ripped a large section off of the back corner. The glass is...
Once your friend sprays Awlgrip he is probably never going to want to spray anything else. The stuff is extremely durable. I usually always put a...
You would be hard pressed to try and re use the same holes. If one happens to line up though you should be fine to re use it. Make certain to...
:p......
I use wood. I use solid fiberglass in all mounting areas and the wood is completely encapsulated. Unless someone drills holes in the thing it is...