Been there and done that but with the 1/2 board acting like a Hobie asymmetric hull. Took forever to repair the halved boards and forever to work...
Always wondered about these guys in this situation, as long as it’s mounted correctly into the deck any stress relieving fibres can be built into...
Always wanted to use one on a in wall glass door of sizes that really fox the normal floor mounted rollers
Isn't there also another version of the centreboard case where the dagger board has a semi eliptic shape at the nose and a 45 degree rear vertical...
And one to buy. 28ft Trimaran Motor Boat | eBay...
Seen and sailed the F101, top class design with very very good attention to detail. Sadly the day we sailed it was in less than 4 knots of wind,...
So why did the beach cats take over, there were other early examples of the likes of the Ninja and yet the cats proliferated or was that just a...
OK, thats what I thought, any ideas of whats its called or any papers on its function anywhere, I need to win a virtual pint and are going to need...
Sorry not really multihull related but I know there's a couple of knowledgible posters here on Gaff rigs. There's been a bit of a virtual bar...
Use cabosil as sparingly as possible, it makes the mix really tough to sand. Much better to simply allow the mix to partly " thicken " by leaving...
Umm we found that Epoxy carbon foam carbon with a light layer of glass on the outer surfaces to give a bit of wear protection, costed out about...
Loving the write ups, this thread is a real reference book. Happy Xmas to all from our locked down Tier 4 UK ( no family allowed to visit unlike...
And you could build it in a narrow shed, miles from any port.
Sadly they have hit something and damaged a rudder, heading to Reunion Island for repairs, that part of the ocean seems to have taken its revenge...
Sodebo is presently trucking along at over 37 knots ( been doing that all day on the tracker ) in rough water just below Capetown SA, which...
Interesting film of the repairs on HugoBoss, was the use of too stiff a material a contributing factor and was the cause when you get too happy...
Just another couple of photos of that build, it was taking about 4 days for each side of the 20 ft central hull to have it foamed, carbon and...
The easiest way almost certainly for building 1 offs is to follow the Farrier build method of female sort of mould using a stongback and ribs with...
I have a F85SR plan set I may well sell, age is getting to the point racing may not be my priority so much.
Clissolds TC601 still ticks a lot of boxes particulalry as the bottom has fallen out of the donor cats prices, the F18's. Sadly mine is still in...
