Hi Due to a change in circumstances the owner of this boat has had to pull out of the build of this very strong, light planning offshore racing...
40ft Offshore racing yacht built in epoxy sandwich using resin infusion. Hull, deck, cuddy and false bow moulds, plus core and trim templates for...
Hi all Could anyone help me on this one please... We have 750L (200 US gal) ballast tanks to fill on the 40 ft racing sail boat we build....
Hi All Now I'm involved with a project to build offshore race (sail) boats I would like to pick a few brains for some of the huge amount of...
Hi all This is for a good friend of mine who is brave/foolish enough to race one of those 6.5m (21ft) Mini rocketships across the Atlantic....
Hi All Happy to see its as busy as ever in here ! Maybe someone can help with this, I am after any recommendations for the following to...
Help! The apparently only surveyor in Belgium authorised by the MCA to do a tonnage survey (about 30 mins I seem to remember) of my yacht has...
Now I know you all like a challenge so here it is!... My new (well 1990) 50ft singlehanded aluminium race boat has water ballast in 4 tanks....
Hi All A lot of the recent Open 50's and 60's seem to have loose footed mainsails. Whats the benefits / down side? Thanks Paul
Anyone got any contact with Auzepy Breneur? he designed Branec III and my new boat - an Akela 50, I am after my boats sail plan ASAP as I have a...
Never let it be said that people don't change their minds...! Since I am not going to be able to get the year off work required to build the...
WOW!! Great looking boat, great photos.... http://www.martin-raget.com/fr/actu/detail.cfm?DOC_ID=R-082003-202006&init=1 more.......
Nautical Structures appoints NonStopYacht as European representatives Nautical Structures - the largest manufacturer of superyacht cranes, davits...
http://www.qei.co.uk/spark Ok so its not restoration, but very pretty...
http://www.image-ination.com/sailcalc.html put in the basic numbers and out pops all kinds of usefull stuff. Also has a database on 1100...
OK Here goes! This sequence assumes some basic knowledge of Rhino - the Snaps, Ortho, curves etc. Almost all of the commands used here come...
I am (rather rashly!) thinking of buying an Ed Dubois designed Aluminium racing yacht and using it for cruising/racing. Her measurements are 40'...
(some people will do anything to get their posts read!) Paint Stripper question... If I had an Aluminium hull faired with a little filler...
Have a look at this http://www.modelpress.com/publisher.htm it makes highly compressed CAD models available for its own viewer to read and...
Ok - I know you lot like a challenge!... I'm on the look out for a new tender for a fair size Classic superyacht: about 17 ft / 5.3m ish...