Hi everyone,I'm trying to figure out the best way to divide (break down) deck and superstructure (cabin) molds for a 55 ft fisherman. The boat...
Hi everyone,I'm trying to figure out the best way to divide (breaK down) deck and superstructure (cabin) molds for a 55 ft fisherman. The boat...
High I'm struggling trying to find small 11" (280 mm) diameter steering wheels. It has to be a sporty looking wheel like those made by...
Hi guys, I'm looking for 3d drawings of Suzuki outboards (current models) for a couple of boats I'm working on. Anyone can help ? I work in rhino.
HI guys, I need a simple file to be converted to igs can anybody help ?
Dear friends, has some of you ever tried to make stability calculations on a RIB ? I've currently done quiet a few test and calculations of...
Hi guys I'm looking for someone manufacturing hatches (flush, aluminum) for commercial vessels in europe,found many in the US but not in europe...
Hi guys, I need some good advices. I'm trying to figure out how to make a good strong standoff box directly from the mould for my 26 leisure RIB....
Hy Everyone, I'm quickly posting the lines for a 57 Ferry I'm working on,this is supposed to be a planing hull with Max beam being 6.8 mt (22.5 ft...
Hi everyone, I'm struggling trying to find a speed/resistence prediction method for power catamarans (planing hard chine) Could you suggest one...
Hi everyone,I'm pleased to invite all the friends of this forum here at www.naumacosdesign.it/Naumatec%20main%202eng.htm to have a look at the...
Hello, here it comes,the good old 1.000.000 $ question,hope someone is able to give an answer based on direct experience. We are in the process...
Hi guys, is it possible to Vacuum bag vynilester resin ? I'm talking of a full 10 mm laminate...or will the resin cure too fast?
Hi guys, I need to figure out this: I have (on paper) a sterndrive wich is 2.7 mt (8 ft 12 inches circa) far from the engine and I would like to...
Hi, is it possible for a RIB to have the cockpit below WL? I know that it's not possible for a non inflatable boat but due to the "almost...
I've spent a lot of time serching for a good book on marine drafting, details drawing and working drawings preparation etc. Does something like...
Hi, this is my second thread on the same topic. I've finally built a 1:6 (1200 mm) scale model of a racing rib,put on a 7.5 cc outoard,weights...
Hi,I can't find what's the minimum coaming (hope I'm using the correct english name) height in the cockpit required by ISO standard. Can anyone...
Hi Guys, I need the Joessel's formula to calculate the force generated by a rudder at different speeds and different angles.
It seems that savitsky rules tend to overestimate resistence as speeds get very high (Fn>4) Any suggestion on how to get a realistic idea of...