Google inflatable boat builders in Florida. There are a few shops there that would probably let you spend a few days helping them with tube...
Get in touch with a tube builder. If you provide the material and the boat to be fitted to, the price should be very reasonable. Or if you prefer...
Yah! should work good ........vill look like Arnold ven I done, much to sand. tanks so much:idea:
Yes copying the contour with reversed sand paper and rigid foam seems like what I need. will glue it the bottom of the palm sander. Even for the...
Are there any special sanders out there that can sand an inside curved surface? I am painting the interior of a marine shower with curved corners...
What is the best adhesive to use for attaching fiberglass to plastic found in Yamaha hulls? I know West System G-Flex works but is there something...
If you want something really outstanding, no work for you!!!! go with a vinyl wrap. You can put anything you want into the design. Wraps are the...
I've done patches ( air gaps ) that have come out looking like that. The fix is easy, will just take longer if there's a lot of it. To me the most...
Thanks for the info. I e-mailed US Composites and they sent me their epoxy data sheet so I could compare it to West System. Their epoxy only has...
Find out what they used for a clear coat and pick some up. you should be able to sand or grind through the blemishes without hitting the carbon...
souljour2000 re; US Composites I checked out the US Composite site to see about the epoxy you mentioned, nice price! How does it compare with...
when you leave the brush suspended in thinner does all the paint sludge settle to the bottom leaving the thinner clear? I know this works well...
I ordered a badger hair brush with the 2 part polyurethane. What is the best way to preserve the brush after tipping? Hope it's not a...
Does anyone know if it really makes a difference to tip off with a real high quality brush? It seems to me the roller is responsible for laying...
In the video he's using one of those round head brushes ......... are they really better than a good regular style brush? thx :confused:
I Can Smell the Gloss Interlux Perfection seems to be the DIY-er's choice for a brush on 2 part poly. Surprisingly the manufacturer shows it...
I want to paint ( roll and tip out ) a small boat with a good 2 part polyurethane, are the fumes dangerous? This will be done in an attached garage.
Nojjan, did you go ahead with building hypalon tubes? I've done a bit of it and getting a good looking finished product is no easy task! I would...
wing does the foam inner air bladder too! http://www.wing.com/product_pages/seaark.htm An all air system running a pressure sensitive blower...
kach22i here's one of many that offer foam-e's!!!!!!! http://www.wing.com In most situations straight air fill is better.
