Ok, so I have two 1/2 hulls that I've carved. One is a 16' Chesepeake Bay crab skiff and the other is a 20' round bilge rowing boat. How do I get...
I'm rebuilding a fiberglass boat that I built about three years ago. It is hand laid with 10 oz. cloth, 12 oz. mat then 10 oz.cloth. I've laidup a...
This probably has been covered before, but I could use some concise suggestions. I have a 20' fiberglass rowing double that was laid up as...
I have been batting an idea around in my mind for a while. On a fin keel, would there be any advantage to have a system of cams in the hollow fin...
is there any way of predicting how much polyester resin is needed to wet out different weights of mat and cloth? If I knew the optimal amount, it...
Almost 25 years ago, I built a kayak from a kit made by Dedham Kayak company formerly from Millis, Massachusetts. It was a very simple kit,...
I live in New England (USA) and we have a growing sport of open water ocean rowing racing. Races are from 4N.M. to 21N.M. in length and are only...
I read a description of the Herreshoff rowing boat "Althelas"(try Google). In the write-up, it was mentioned that the location of the maximum beam...
I purchased Pro basic before I found this forum. I have no CAD experience and have been very slowly learning the program. I find the documentation...
I have a mold of a 16' 8" rowing boat that I took off a boat that I designed and built. I pulled one boat out of the mold. The lay up is 3 layers...