Hello Fellow IMPer's, I did not get a chance to make it to the IMP auction. Does anyone out there know who bought the tooling , any of it? In...
Hence the name 255, and I might add that is a true 25'5" without bow pulpit or molded swim platform. Overall length (OAL) is measured at the shear...
25.5 Lucian, That would be a 255 in current terminolgy. We made that boat for alot of years. I can scrounge through some brochures that I...
Karl, I bet you had a big grin when you heard her fire. The tanks were rectangular. You should check where the fuel line goes into the tank....
Karl, Okay let go back to the basics. Put all wires back where they belong. Run a wire from the positive post on the battery to the positive...
joining the group Thanks for the welcome. 76 Aztec, that motor and drive is what is known a stringer mount. If you look at the mounting feet they...
27' Imp . The 27' has a cockpit liner in it. The aft deck and motor cover was built from 1 mold. It stops right at the entry to the forward berth....
There should be clam shell vents on the gunwale. The 4" hose needs to be attached to the underneath side and run all the way sown into the bilge....
If you have power to the coil and still no fire you probably have an open somewhere . Start with the idle interupters located on the gimble...
hello How strange to find this site. I worked for IMP for about 6 years before taking a job building boats in South Carolina. I read the story...
