I used cheap Danish scissors since they'll be ruined in no time. The one thing I did do that makes cutting easier and leaves no frayed cuts, I...
Don't skimp on a respirator or eye protection dealing with FG. Skimp on the other tools you may need. Ruined my lungs over the years (not just FG)...
bntii has got it right. Flexing of the glass causes the crazing. In my hot rod days I had a till front end/hood assy. It would always craze the...
Why not just velcro the box in place. It just has to hold itself down and not shift, rattle, etc. Then you can always remove it if you need to get...
I did hear back from Datamarine. But the response was to buy a handbook from them, no spec or tech talk. I have installed the Hummingbird...
I have a Datamarine L120 digital depth finder and a DX111-120 transducer, which is mounted through hull. I want to install a Hummingbird...
Not to hijack the thread but here's another handy power boat listing, some euro's included.
Gelcoat shine Wet_Foot, 1500 may still be too rough to polish (easily). I had heavy oxidation/fading in both the black and red. I used upto 2500...
Always wear protective clothing, mask, gloves, eyeware. Tyvek coveralls are $10.00. (Lowes) Tape your gaps up. Set your mind on to getting it...
I too had a hard time syphoning the gas out. Had a full tank, 70 gals. I tried blowing compressed air into the filler line and hoping to get it to...
Travism, I salute you, my friend. I'm glad it worked out for you. More then accomplishment, you KNOW what's under your butt...most don't. And you...
I have always been a project/re-builder of sorts. I made a good living rebuilding industrial machinery. Custom car, hotrodder since the 60's and...
Belly of the Beast - the Saga Ends After two bouts with a scalpel wielding surgeon at the local hospital, removing moldy stringer splinters, I'm...
I'm using it now ( J. greer) 300/21 no problem, long pot life, decent price. Eric H
I'm with Marshmat. I think fish prefer the rumble of diesel over the bark of a gas engine. And the bigger the engine and boat the more ya catch....
Anti Fouling paint removal Jack Before After (at night) I have not tryed to buff or anything. It came off pretty good. Good Luck Eric R
I removed mine with lacquer thinner and dish soap. (dawn) Brushed thinner on bottom paint till it's damp let it sit 5 min. Take plastic or wooden...
Marchmat, Thanks, you are right I don't have much left in the hull. As i said; Neither wall in the cuddy was/is tabbed in to the upper deck. The...
Boat 22' cuddy I/O I've finished gutting the beast of wet stuff. Windshield, engine and bowrails are about the only things not saturated. I am...
Do you know of the best way to avoid leaks at my stanchions? Drill Oversize holes. Fill with epoxy Drill holes for bolt size. Mount backup plates...