Stonebreaker, Thanks for the info on the fast cam deal. This is a marine Mercruiser 2 BBL carb and it idles at 1000 RPM on the choke cam. When...
Stonebreaker, Thanks for the info on the fuel relay. I saw mention of that in documentation I read. I don't know where the relay is but...
Alex, Thanks, I'll do that. Last status, after breaking the choke shaft holding the choke cover plate, I decided to check for...
Alex, what pin position does the wire go in the ECM to change the timing mode? The engine is not an MCM but it does have a Thunderbolt...
No! Once the shaft broke, the mosquitoes eating me and it getting dark, I closed up the boat and will give it another shot after work later...
Stonebreaker, The choke is electric but that is where the fun begins. The electricity heats a metal coil connected to a detent connected to...
Stonebreaker, The engine is not fuel injected. The computer module has connetors but not the type that module can be plugged into for...
My recommendation is to cover all new wood below decks with fiberglass resin. This would eliminate moisture entering wood later in life....
Almost 20% increase in HP and speed. You have to consider the percentages of how many cylinders you have in total and how many of them are...
Ooops, hit the wrong key.
You didn' t mention how many cyliners you had, I will assume there are 8, could be 6, no mater, your HP and speed will dramatically increase if it...
I have changed the cap, rotor, ICU, and the sensor in the distributor. The engine turns over, tries to start, then just turns over.
