Hi, I have a 6m Kurt Hughes designed tri with a 9 m mast with mainsail of 16.5 sq mtr. (Luff is 8.2 m and foot is 2.6 m) The boat is under...
I represent a Western managed trading company based in Asia. We seek a design for a small dinghy or tender that would be easy to row. The tender...
I have seen spinnaker systems on small sail boats like 59 er skiffs where the spinnaker is lowered and raised from wide tube. This looks far...
I have a 20' trimaran and trying to make up my mind about a furling screacher versus a spinnaker . Ideally I would like to have a screacher on a...
I have a 20 ' sailing trimaran with 1 , 3 hp outboard mounted near the stern on the starboard side. It powers the boat along at about 5-6 knots....
I have a 20' light weight trimaran which has a prodder/bow sprite about 3' out from the bow. The prodder was designed for a spinnaker but I am...
I have a standard Hobie 16 Mast, 26'6" long. Standard H16 main sail is abt 155 sq ft.The mast is used on a 20 foot Trimaran. I want to...
What is the Best “One_Off” building method using PVC Closed Cell Foam I want to build a “one-off” 20’ catamaran hull in PVC Closed Cell Foam....
Would anyone know a spar manufacturer that makes F18 masts?. (eg , Hobie Tiger, Nacra etc) I realise I can buy a Tiger or Nacra mast from...
Is it possible for condensation (water) to form in trimaran amas that have been completely sealed and that are water and air tight? Thanks for...
Is it possible for condensation to form in sealed air and water tight hulls? I am thinking specifically of beach cat hulls and trimaram amas. I...
Hi , Can anyone tell me the best way to sleeve a mast.? Mast in question is a Hobie 16. The sleeve could either go about 4 feet from the mast...
Hi, Can anyone help me with a design for a mast sleeve.? Specially, I need to sleeve a Hobie 16 mast about 1 foot above the gooseneck Thanks