I have cut out the widows on a Roughwater 36 Pilot house and replace the plywood with 3/4 douglas fir, I want to glass over and fair I was...
I have a 36 ft Roughwater motorsailer, and the stringers on the boat have about 5/16 layer if glass on them, I have drilled a few holes and the...
has anyone tried to use Trex plastic decking material to make rubrails or toerails on a boat?
I have learned alot from this forum, I have a 36 foot motorsailer, the hull is fiberglass (very thick) and the decks and wheel house is glassed...
In the spring I will be ready to paint my boat, it is a 36 motorsailer with a fiberglass hull and wood with fiberglass over decks, the pilot house...
Does anyone know if IPE is a good wood to use as a rubrail or a toe rail on a boat, I have to replace all of the wood and I want somethng that...
I am going to build a rectangular wooden mast and the material I will used will be Douglas Fir and epoxy as the glue, I have "Elements of Yacht...
is the coloring agent the same for epoxy as for polyester resin?
what wood, other than teak is good for the rub rail, and toerails of a boat?, the reason I say this is , I am having a hard time finding the sizes...
The lenght of the mast is appox 30 feet, it will go on a motorsailer, first, what type of wood, and are there any sites where I can look at some...
I am rebuilding a 36 ft motorsailer, that had serious deck and cabin problems, I have repaired the decks with Douglas Fir and I am putting epoxy...
I have been on a few threads about stringers, and I do appreciate the input, most of you guys have forgot more about resins than I will know, I...
Has anyone got a site were I can buy injectable urethane foam to replace the wood in my stringers?
I need to know if it would be acceptable to inject urethane foam into the stringers after the compression areas were fixed with epoxy or wood, all...
Where is a good place to buy new or used windows and portholes?
I have a 36 ft motorsailer and the stringers which were made from mahoganey are mostly rotted out, I really don't want to tear out the entire...
Has anyone ever heard of a Roughwater 36 motorsailer, they are designed by Ed Monk