airless or air? what is a good airless to use with awlgrip topcoats?which is best airless or air
I haven't used Awl-grip since 1984 when I painted a 32 santana, has anything changed, do they have better solvents for brushing, and what is the...
I have cut out the widows on a Roughwater 36 Pilot house and replace the plywood with 3/4 douglas fir, I want to glass over and fair I was...
Thanks for the input, I have been in the service and industrial buisness for years, and I know there is the right way and many wrong ways to do...
I don't want to rip the entire floor and bulkheds out to do that, plus that the glass around the stringers are solid and thick, my main concern is...
I have a 36 ft Roughwater motorsailer, and the stringers on the boat have about 5/16 layer if glass on them, I have drilled a few holes and the...
what type of plastic? I believe it is polyethylene.....recycled plastic bags and wood chips
has anyone tried to use Trex plastic decking material to make rubrails or toerails on a boat?
I have learned alot from this forum, I have a 36 foot motorsailer, the hull is fiberglass (very thick) and the decks and wheel house is glassed...
I bought one and I am replacing the entire deck, tore out the salon windows and replaced the 3/4 ply wood and glassed it, look for water and rot...
I would really appreciate if you could measure your mast from the deck to the top, I figured it was 31 feet, I will have to make a mast, the...
who says that repairing a stringer with epoxy filled materials is a cheap fix, if the stringer is wood that is encased in mat and roven woven but...
Pictures When you want to submit a post with pictures, you cannot use the quick post, used the normal or advanced, the post box with fonts, and...
thanks Thanks for the info, I am no engineer, First I want a wood that is durable, second it has to be in ready supply, and the info I have...
Carioca, I attached some pictures of the boat, so you could see the bend I would have to make
rub rails and toe rails here are some before and after pictures of the boat[ATTACH] [ATTACH] [ATTACH]
Carioca, How does Ipe bend? the rub rails on the boat I am working on have a big radius at the bow, should cut thin strips and laminate them,...
Thanks, I have found that IPE is cheaper than teak, and more lumber yards have it here, it is used mainly for decking, what other glues work with...
In the spring I will be ready to paint my boat, it is a 36 motorsailer with a fiberglass hull and wood with fiberglass over decks, the pilot house...
Does anyone know if IPE is a good wood to use as a rubrail or a toe rail on a boat, I have to replace all of the wood and I want somethng that...
