24' cold-mould moulded plywood boat with many years. Needs general TLC but generally in good condition. For aesthetic reasons and for long term...
What sort of block size should be used for a davit? It's to lift an inflatable with a 5hp on the back. All up about 80kg. The blocks themselves...
I have a customer who requires 2 sets of winches for his Duncanson 29. He purchased the boat as a project and it no longer has any of the existing...
For those interested in quality sailing and marine hardware at a lower cost I'm sourcing a few products from overseas and listing them on Ebay....
New Self-tailing Winch See on my Ebay site. Thx
Hi, Does anyone know of any hardstand boat storage areas in Sydney where I can work on my boat ? It can be outdoors as long as I have...
Hi, I need to cut a few sections of wire rope which is 10mm in diametre. I could rush out and spend money on a giant cable cutter but for a...
Hi all I was hoping for a little advice. Im in Australia. Im being offered a dinghy mould and my intention is to start making dinghies as a...
Hi all, I'd like to put a viewing pane in the bottom of the hull just for the pleasure of looking underwater. Maybe a bit radical for alot of...
Hi all, Ive already posted a couple of threads on renovating my 24' sailboat, unfortunately my project has come to standstill due to unexpected...
Hi Im located in Sydney and am looking for a set of used self-tailing winches for my boat. Rope jammers, and a rodkicker would be good too. Let...
Hi all This thread is following on from two previous threads, but I have decided to create a brand new one where all advice and info can be...
Hi all I've been looking for information in past threads regarding the removal of paint back to bare wood. There have been some posts in the...
Hi ya all, Question for the metal heads............ I am restoring a 20 year old double diagonal moulded ply 24' sailboat designed by Alan...
