-------------------------------------------------------------------------------- Afternoon, I'am just after some information on Double Bias...
Afternoon, I'am just after some information on Double Bias Fabric-617gm,the widest rolls that I have been able to find here in...
Evening, First up let me state that I,am not a boiler maker or a welder and what I know about welding you could write on the back of a...
Afternoon, I was just wondering is it possible to use epoxy in a boat hull mould, I have noticed that just about all the questions...
Aftrenoon Everyone, The Plans for my boat call for the deck to be screwed down and then fibreglass tape to be used to...
Evening Everyone, I'm not really sure if this is the right forum for this, but would anyone be able to help me with any...
Afternoon Everyone, I originally posted this on the composite and fibre glass forum I think it should have been posted here sorry if this...
Morning Everyone, I'm just after some opinions on what is considered the stronger of the two adhesive types, the first...
Evening, I'm just after opinions on what would be the better adhesive to use to bond an aluminium strip along the side of my boat, it...
Morning, I'm looking for some type of product which could possibly be attached along the chine edges somehow to help protect them. I'm...
Morning Everyone, I'm in the process of fairng my hull,when I laminated the hull i had to put a radius (approx 18mm) on...
Evening, At what stage do air bubbles become a major concern in a laminate. I'm not talking large ones, the largest one is about the...
Morning, I'm just chasing some info on post curing epoxy to be used on a boat I'am building using the stich n glue method of...
Morning, When laminating over ply what is the ideal size radius to have on corners when laying fabric, this mainly concerns the chine...
Morning, Would anyone be able to point me in the right direction to anyone who either sells or manufactures a Venturi type of Scupper...
Afternoon, I have been told of several different methods of laminating plywood (1) The first being to coat the ply with epoxy so...
Evening I have asked quite a few questions about several boat building procedures eg understanding lamination schedules, scarfing plywood and...
Morning, Are there any real advantages in using Gaboon plywood over Meranti(Pacific maple). The boat to be built is of a planing hull...
Morning, I was just wondering are design specifications as set out by the relevant authorities such as USL,DNV,ABS or any other...
Evening, I'm looking at a set preliminary drawings for a boat to be built out of plywood and Biaxial fabric (stitch/glue), and on the...
