Oh I see a battery charger is plugged into a inverter which is connected to the Main Battery!! The problem here is you need the Mr Fusion to tie...
http://www.youtube.com/watch?v=gX6oR13qUv8 http://www.youtube.com/watch?v=Dd8-VlFKyHk&feature=related
I know what you mean,Kuwait was 14% LOL things dried out there!
Yes, I have spent most of my career in So Florida it is always above 80% Humidity, And I keep a meter handy,you would really be surprised how fast...
Spray? You can Brush the first coat of inhibited gelcoat on, then hit it with a 8" DA.
Wood keep it covered until you use it especially Balsa, you can watch it curling against the scrim. With the esters, I had a host of inhibiter's...
We have dealt with this all our careers and learned long ago how to deal with it.
Give it a go,your resin is not contaminated with binder so it is half way in place before rolling and the laminates are crystal clear,speaking of...
Do a test with your resin system.
I agree with mark,Epoxy is the only way to go.
I Always had huge Industrial vacuum systems in my shops and was bagging in the early 80's anyway,started Infusing @ 1990 using it to fix glitches...
Right and Gelcoat is still the standard finish on production boats,So spray Equipment is involved and that requires mat backup , Skinout ,Check...
Tunnels, same here,I used Venus most of my career and never had a problem,The 80 Guns were a pleasure to use fit the hand perfect and the manually...
Gelcoat is cheap and gets you up on a fair surface,Then you can go anyway you want,If you are going for gelcoat finish, a little gelcoat mixed...
Do not put any wax in the last layup,we generally use thickened gelcoat to get off the glass and start sanding in prep for Gelcoat or Painting.
http://www.tricelcorp.com/apps_home.html
Can you get any gun roving with the red tracer? We used this in training years ago ,as for chopper skinout with a skilled operator it is just...
Fuel consumption?? A properly designed cat is what you are looking for.
I agree the 3M 77 Is pretty much what NOT to use.I have been using InfuZene AV and have not seen anything problematic with it.
Cat I would glass the hull "Stacked" together, as you have found out these parts are subject to a lot of movement until the sandwich is completed...