I have some old paper drawings I want to put into a modern software package. What is easiest software package to do this in? I have the...
Looking for someone to do an interior redesign of an older Sport Fisher type of vessel. Might need some exterior upgrading as well. West Coast...
Well... diesel fuel poured on the sample of grizzly grip did not stain. It did smell not so good for a day or two. Gasoline also smelled for a...
Thanks for the links. The molds are not usable, as they were essentially left out to rot as I understand it. Cheaper and easier to start from...
Grizzly grip sample showed up the other day. It seems not bad, but when rubbing my hand over it, it seems to depart a light residue on my fingers....
He is looking to go back into production so he needs a real mold that will be used for many hulls. Im not sure the best way here but making a real...
A friend of mine has a set of sport fisher plans, 38ft I think is was. This boat was in production for a number of years but for whatever reason...
I am happy to have found this thread as I am about to "redo" the diamond non skid pattern on a sport fisher. I read all the above and called...
Almost done with the repair.. Well.. I glassed over the joint with 4 layers of glass on one side, and back blocked on the other side. I epoxied...
Back block.. what wood To make things look somewhat nice, I need to stay with half inch wood of some sort. Most lumber yards around me have half...
Bulkhead update This has been slowwwww going. But Ive gotten the rotten stuff out mostly, replaced with good wood. Removed old tabbings, cut matt...
Bulkhead tabbings Well.. my bulkhead repair job is still in progress. Im at the point now Im ready to replace some of the tabbings I ground out....
Clarification Hmm after re reading my post its not clear at all. Sorry.. I need a Naval Architect to redesign an 80's vintage sport fisher. I...
Rot sucks, how much epoxy? yes.. I have been (slowly) progressing on the bulkhead repair job. Ground away all the glass and exposed the moist...
What would the best epoxy be to use on a wood bulkhead repair job? I cut out the rotten wood and am going to join new piece in. It needs to be...
Im thinking of having an older sport fisher design updated to modern standards. About how much would this cost me? Any ideas?? Thanks Jose
This is good information. Im hoping to salvage the bottom part of the bulkhead. After poking, probing, prodding, the upper 1/3 looks bad, and the...
I notice my bulkhead real rotten. Delamninated on top, soft, spongy other places. I need to fix. Not easy to make pattern for new one. How best...