Thanks for the lead on the Haines Hunter V15. Did a bit of reading this morning. There is an Australian Trailer Boat video series on Vimeo about a...
It has been some time since I have posted about this project (which is still hanging around...). Here are some updated pictures. 2 stringers,...
Thanks PAR I will take a look.
What is the recommended product to repair the gouges, chips on strakes, etc on the hull bottom prior to the barrier coat? Looking for something...
[img]
Not sure, the engine was out when I got the boat. I know it was a 4 cylinder but not even sure what brand. I did get a few more things done...
This hull originally had the water ballast. At least the outboard versions did. This specific hull was an i/o and didn't have the ballast.
Since I think I am on the correct track with the layup schedule... I put 2 layers of 1708 on each side. I primed the hull bottom with neat...
Thank You. I was hoping for that response. The Coosa being used for this portion of the project if the Bluewater 26.
I have a small project going on and am getting conflicting information about stringer layup schedule. Background: Hull is a 14 foot Ray Hunt...
Sail number 1433. Sail mfg date was 1954.
I think we may have the answer here. The GP14 looks to be what I have. Unfortunately the boat is several hours away and I will not get to her...
Definitely plywood. Obviously not as old as suggested. Hoping to have some photos in the next few days. Thank you!
Interesting. The Leader was first built in 1960 or so. Previous owner said this came from the 30's. Search will continue.
Thanks for the info. I will get a picture of the hull and post. The PDF of the leader looks close, but I was told this never had a spinnaker. Many...
I came across a small sailboat from this company. Guessing it is from the 30's. 14' and a beam just over 5'. Wooden centerboard. Anyone know...
Got it. I assume at keel, all of this is doubled because of overlap and chine is close to double. Eca use of hull side to bottom overlaps. You...
Are you talking about 45/45/90 with mat or without? If without why? As a layman, I would think it better to only have to cut 1X not double for...
So bak to original question... If you were going to spec the lamination schedule for a 25 foot boat (Surfhunter type hull performance...
Thanks everyone. I have been away from computer for a day or so. Much appreciated. Ian.
