Does anyone know who this outfit is? Contact information just gives a email address, but no person or business connected to it. This is the email...
Can corn starch be used as a silica substitute? It would be a lower cost thixotropic additive in alkaline mixtures like epoxy. Would is also...
I have been knocked down. I have been capsized and anyone that thinks a professional crew has their wits about them in this circumstance is just...
It is a simple proposition, put a bunch of lubbers on a boat, have it laid on its beam ends and expect them to have a level enough head to dog...
You and Loveofsea would get along just fine. With some internal volume calculations averaged on a handful of vessels all over say 50' you will...
Floation compartments on 170' vessels are not practical to say the least. Buoyancy chambers on anything over a trailer sailor are not a practical...
Most designs are very specific about where the engine should be located and how it is mounted. Have you made enough changes to the original plans,...
Starboard is HDPE
He did contact Glen-L directly and got a poor reception. Maybe their forum would be better.
You will have to provide more information about the different boats and rigs, but I proposed something like this years ago and promptly was...
Considering her size and speed, this is nicely efficient, even if out of our class or reality. I have a friend that crosses to the med each year....
There are a lot of modifiers you can use. Is there something specific you want to do?
The shaft angle on all of these is pretty severe, but within the usual for this style of boat. The engine and trans is not overly heavy and this...
With polyester or vinylester, you must use mat, so you are good to go osborn159. Seal the wooden parts well or you will be doing this again.
Call Dave Gerr.
The use of mat is a waste of resin if using epoxy. There is no difference in opinion among knowledgeable epoxy users in regard to mat and epoxy...
There have been dozens, if not hundreds of this design built and it does have concave water lines forward and other speed limiting hull shape...
Thanks, MIA
Lens distortion will will show up around the perimeter of the projection. The size of the enlargement and the lens used will dictate how much...
Why are you yelling with red type Tunnels? [IMG] [IMG] [IMG] As you can see from the upside down hull taken from Glen-L, the shaft...