in the same way the exhaust valves not well adjusted (gap to small) , or a restriction on the fuel return line . Check the temp cylinder by...
Naupigo, 1-If your are really student , i'm surprise for your request because in general student are very clever to do this , my soon who is...
so : no over tem, no over oil pressure, no black smoke with dust. it could be an advance problem check the sensor it was a problem on QD32 on 4*4...
Hi , do you have any indication of the temp (water /oil) and pressure (oil). What is the RPM without load of the both engines (void test) ? do you...
a thousand of thanks Olav.
Hi all, Someone now where I can get free edition of the diagrams from guldhammer and harvald Thanks French 44
the density is in general from 1.3 t/m3 to 1.5 t/m3 , the spacing of 500 mm is good and no more than 800 mm . in addition you have ragging so you...
that you use is for hull not for the inner plate of cargo , you may have a special part for that, in BV is in special ship and dredger
check on the rules that you use if you don't have additional for this part of the ship. In general you have a special chapter for.
the difference is the temperature that the ship will be used, for normal ship you use a grade for ice breaker you use d or e grade . you can find...
You can use BV rules for inland water , Texts are free on veristar web site another rules is DNV it's the same .
more details Hi all, Firstly thanks for your lights. The 4 rudders were on the same ship, it's a pusher boat. Lenght about 30 m speed around...
Hi gentlement, I need help on rudder failure. Look the pictures and tell me if you have an idea for that. I'd never see that before and the...
kaplan Thanks, i know that the torque should be more than b serie but i need to prove to the guys this fact and for that i need chart for this...
Hi , I'm looking for open water test of KA4 series with and without kort. We have some trouble to have all the rpm on the engine and the...
Dir All, I want to open a discution about the pusher,barge etc... in fact river boat. I worked long time for marine enginnering ship and now...
HI All, Find one system for stabilisation of aircracft carrier[ATTACH]
Hi Phxysius, What's the weather in Sing, Nice place I spent some time following the transformation of one ship for my company and we have till...
Hi All, I'm trying to find 2d cad block on outboard engine (150 hp,175hp,200hp), Anybody can help me ! I don't find on makers sites regards...
my opinion Hi all, In order to stop this kind of copy the best way is to stop making ships in GRP. It's very bad for the earth (chemical...