I have a 1996 Shamrock 22' WA with an aluminum top. I noticed the anchor light on top of the AL top was not working. This light has 3 wires going...
I have a shamrock powerboat where the keel ran over something and is damaged. I have the gelcoat grinded off the bottom of the keel (about 1.5"...
I posted this on the fiberglass board but did not get any responses and figured I would post it here also. I just bought a powerboat that has...
I wanted to add one more question. What type of resin should I use (epoxy or poly)? I believe the boat is polyester but all I have ever used is...
I just bought a powerboat that has some damage on the bottom. I was told the boat broke loose from a dock and bounced up and down near the shore...
I have an old wooden chesapeake bay deadrise I have been working on for years. I painted the fiberglass deck and engine box with a 2 part epoxy...
I know silicon bronze is the metal of choice but is it Ok to have monel as fastners for planks on the hull? I have a 27 year old chesapeake bay...
PAR, I sent the pics again to your email. If you dont get them let me know. Its a pretty big file. I will send two picks at a time in multiple...
thanks again for your help. I will re-send the pics tonight when I get home.
Par, thanks for your coment and you answered my first question. My second question was about the final coat of epoxy. Should I add a filler to...
Par, Your method is going to be very helpfull. Thanks
I have fiberglassed decks, engine boxes, etc... But i am no expert in glass work. If I am applying fiberglass to a vertical surface do I need...
Par & Chief, Thanks for your reply's. Chief this picture was taken after I scraped and gouged the crap out of all the wood around the rudder box...
Her are a couple pics of my problem. I have a pic from the front and from the back. You can see the back is pretty bad.
You say use lag bolts again to fasten the rudder box back down. Is it Ok to lag through the eopxy? I thought it would crack the epoxy?
I do not know how to post pics. Is there directions? USCGRET/E8, Yes this is the typical deadrise workboat style. The main beam down the...
Thanks for the reply. I will try to take some picks and post them for some further advice. No this is not a yacht quality boat it is a workboat,...
I have a 37' wooden chesapeake baybuilt. At the stern of the boat on the topside the previous owner mounted the bronze rudder box he used...
Thanks for your comments PAR. No this is not the Block Island COW, that was my nieghbors boat I placed the add for him because he is no computer...
I have a chespeake baybuilt, the boat is white cedar over oak ribs. I am considering fiberglassing the entire boat and wanted some opinions....