If you want to convert a carb engine to EFI, take a look at http://www.bgsoflex.com/megasquirt.html. Ive converted my MB190 from carb to EFI...
Xarax If i would have been very anxious about the radius I’d use a English wheel forming the plates to perfect shape rather than making molds...
xarax Yes its my first boat i build but id say that im a deasent fabricator. So its not the first time im holding a mig torch in my hands. But...
xarax As a truly amateur backyard homebrew builder that’s three years into a 60 feet steel radius chine sailor i'd suggest that as a test you...
Gang Frostys way is my way besides for holes bigger than ~2" i wouldnt use a file. Better of with angle grinder with a very worn/small cutting...
Bad thing's she know shes on in a million ;)
Gents Me and my wife are building a 60f round chine steel sailor from scratch. we started with bare paper plans with full size patterns in...
Me and my wife flipped our steel 60ftr with tree comalongs and a hydraulic jack. no expense. Were almost done with superstructure by now and we’ve...
Hi Tzuriel Im glad im able to help with photos :) Im working on the boat saterdays and sundays and a few extra dayts in between. last...
Hi. im building a 60ft'er. Here is a picture of my strongback at a very early stage with only frames erected....
there is diferent models of OM617 engines with up to 123hp http://en.wikipedia.org/wiki/Mercedes-Benz_OM617_engine
timgoz. I’m in the middle of building a steel boat in a backyard with no shelter. as said earlier, rain is more troublesome than the wind. if a...
After a quick google. Västra banken is apparently going to Grenada (West Indies), where it will start its second life as the landmark of the Le...
Its a lightship and served as one from 1901 to 1970 decommissioned and used as a café. During this time the lighthouse and deckhouse had been...
My pile of steel is flatbar and plate. it cost me 15000USD. Its for a bare 60ft rc hull. Not including steel for keel and tanks som im calculating...