Guys I want to make and install a cockpit deck on my boat It is a 12 foot X9.5 wide area Would like to use Vinylester resin and hand lay up There...
I wanted to get some advise on spraying gelcoat webbing. I have used in the past but have not been happy with the results I used the percentage...
I have some small fish holds maybe 150 quart in size They are rectangular in shape and constructed of Corecell and glass I am looking for...
I would like to know what is the recommended solvent to dewax a flowcoated Gelcoat surface to prepare for a 2 part LP paint, I plan to do some...
Hey guys Can you recommend an epoxy for bedding stainless steel fuel tank fittings in a composite fuel tank. Thank you
Hello I have a request to build a fairly large GRP hard top with a dimension of aprox. 8.5 feet wide by 10 feet long. For a 42 foot flybridge...
Hey Guys I was wondering what tips you have to share to accomplish super clean paint edge lines, particularly when doing a two color non skid...
Hey guys I wanted to get some feedback on making repairs to DCPD blend and aged Vinyl Ester resin. I do fiberglass repairs and gelcoat work and...
Hey Guys I need to make a GRP swim step aprox. dimension 96 in X 32 in I don't know if it is possible to make a cheap mold, designed for...
Hey Guys I am having an issue trying to make my tank lids flat hand lay up 1/2 in Corecell foam laminate schedule 1.5oz matt / 1708 cloth /...
Hello guys I thought I had a pretty good handle on the use and application of Gelcoat but ran into a situation. I built integral fuel tanks...
Hey guys What is you preferred method of making a NON MOLDED nonskid deck surface that will be silica or grip text and 2Pk paint I have made...
Hey guys was hoping to gain some insight. When I do Gel coat repairs on an slightly offwhite colored boat I add yellow oxide and maybe a touch of...
Hello guys I would like to paint a molded gelcoat factory non skid deck My question is it possible to get good paint adhesion to molded non skid...
Hey guys what are you using for clamps to re-core a transom Any pictures ? Somebody hear had made some nice clamps with steel tube and...
Hey guys I wasn't sure where to post this question, but know this is an active forum with many knowledgeable individuals. I am looking to...
Hi I have a boat that I am trying to repair. It HAD a crack running 90 degrees across a lifting strake. It seems there was a substantial air...
Hello Was hoping someone can point me in the right direction. I have a boat that needs some fiberglass repairs (a Mexican made Panga) The...
Hi I need to repair (12) 5/16in (8mm) holes in a swim step. The owner of the boat wants to match the factory molded nonskid while filling each...
Hey Guys, I want to refinish factory molded nonskid decking with out sanding off the non skid. Can this be done by abrading with cleanser...
