I did own the company and did fund the entire plug construction and hull. The customer wanted a boat build from a mold. The designer and I had an...
Not a disgruntled employee! I am on the one noted as a disgruntled employee. I was contracted to build a 33' sportboat. I owned the rights to...
This is what I use, so far. http://i119.photobucket.com/albums/o145/Tynaje/Bertram%2025/P1010020-1.jpg I will do my best to contact my friend...
I could see using the Duratec primer on the entire hull, then spray your gelcoat over the Duratec. I never used their product until I built the...
28, stand your ground, you are on the right track. I have been pushing gelcoat recoating for 4 years now. I dont pride myself on being a...
There is another reason for the blistering UNDER epoxy and mostly applies to poorly laminated boats like the Stevens 47. It is the MAT layer of...
Mini Endeavour Here is a 20 ft replica of Endeavour. [IMG] http://s119.photobucket.com/albums/o145/Tynaje/Endeavour%20Mini/
http://www.reichhold.com/composites/products/product.cfm?ID=60&processID=25 I have build several large tools using filled resin tooling,,,,,,I...
www.minicraft.com for great advice........... Duratec High Gloss Clear(I used to use their high gloss additive but have been convinced to use...
Ok,War Whoop.............FIRST....Posting Balteks site proves nothing,except you know how to add links.........Second,builders use Vinyl resin to...
I agree with gonzo on his racing hull positon and well bonded fittings and core.Panel stiffness speaks for itself,but I have also been on older...
There are two issues to consider.you will need a plug or large solid surface to build a composite deck.You need an open area the size of the boat...
