I am rebuilding a Stevens 47 sailboat. I had to remove the bronze skeg cap which is about 2 1/2 feet long. It is of course hollow and bolts onto...
You will need to purchase stitched mat to work with epoxy. I use Vectorply products currently doing layup with with quadaxil product with the mat...
Marlon seems to be proprietary to Forspar. They have rated the thru hulls tightening not to exceed 20lbs torque. Hopefully some one with direct...
Thanks Hunter25 and Tim B. My intention was not to save money (allow though thats always nice) but to reduce the metals and the galvanic reaction...
I am in the middle of a boat restoration project a 47' sail boat displacement 32,000 lbs. I am considering replacing all the thru hulls and sea...
Thanks for the advise. JC47
Monarch Embossing Tool I was flipping thru a composites one tooling and processing supplies catalog and remembered your thread. Monarch Reverse...
I am repairing a Stevens 47 Sailboat vintage 1981. I have had to remove the interior joiner-work salon, galley and aft stateroom port to get to...
This material is used by Glacier Bay to create panels for ice box's. JC47
Came across this product looks like it could do your job. http://www.softsandrubber.com/ JC47
West System has videos on the following topics. JC 002-892 Basic Application Techniques VHS-20 minutes. A guide to optimum use of WEST...
Thanks for the info. JC
Thanks for the tip. JC
Do any of you guys no of a source for Aluminum toe rails. Need about 110 feet. JC
Mast I am looking for a replacement aluminum mast for my boat. I am interested in where you bought yours. Jack
I am looking for sources for Toe Rails and a new mast with spreaders for my Stevens 47 Yacht.
I am repairing major damage to a Stevens 47 sailboat. Orig hull is poly no core. Damage is mid beam to transom, from Deck-Hull joint to 2'...