Woven matt has a 150gram csm on one side ,this saves time and resin when doing a series of layups . Stitched fabrics are inclined to shear...
A simple lay up for a dinghy 1 -GEL COAT ALL OVER 2 COATS IF BRUSHING 2 -1 450 GRAM CSM TO COVER GEL AS THE FIRST SKIN 3 -1 450 GRAM CSM +...
Glass lay up ? Hi have you had any reply's as to the glass to use ?
Fire ! :eek: Hi sorry cant help with what you are looking for in the way of a chopper gun . Just asking as to what started the fire ?
As mentioned 50mm is the minimum amount to do any overlap anywhere in hi stress situations it is 80mm to 100mm when using cloths and...
Hi If there is no reasonable access to the back of the dammaged area all can be done from the outside without to much trouble . Reshape the...
A libiral coating of Petrolium jelly coating on the former tube first , Wrap a layer of plastic sheet around the tube ( the jelly will grip the...
one piece front ends Have a look at the drag car scene and see how they get round the problem of hinging and lockdowns etc . Choose your...
poly, vinyl, epoxy, Resins usage should go in the order above . Poly is the bottom of the scale on quality , Vinylester is in the middle and has...
Gel coating Gel coating is a very fickle process . Using the same gel out of the same container , the same catalyst and all should be the same...
There are some excilent urethane two part paints on the market and they are usully harder than Gel coat . Check with the manufacturer about the...
Not only sensitve to catalyst ratio but also the types of thinners used as well , it can change the colour and the eventual hardness . Me i use...