after you have grind the wood down and cleaned with acetone ( dudes a irishman he wont waste Alcohol Iam a mick myself from north co dublin ) try...
I have a friend who has the hot vac system here in canda and it does work and work good,, after having a good look at the system working on a...
and you can gel over epoxy i had a customer who repaired his canoe told me he used gelcoat to fill in the gouges and dings and just wanted me to...
if you are 77not sure if the gel is waxed or not here is what to do get a cup but make sure its not a waxed coffee type cup, fill it with acetone...
try using a band saw
For the past 6 months I have been running a gelcoat and fiberglass repair course on the weekends at my workshop, if anyone is interested in taking...
nothing new to find out you got a bad batch of gel,, i once ordered green gelcoat and got a gallon of green pigment ***** to wipe off.. i use...
if you go to the baking section of the supermarket and buy the little sugar balls for decorating iceing get a few different sizes, after you...
the foam will break down with time from impact etc, and you will be left with dust in the tube
did you wear gloves while you were cutting the fiberglass, i see this problem with guys waxing moulds and not properly washing the wax off there...
cut out the allagated area with a razor blade and carefully remove with out releasing the rest of the gel then brush on some gel over that area i...
marshmat there is a major movie being made here in toronto, guys i know have made a swing stage platform for a ship to sit on and the bloody thing...
if you make up a paste or use a premade filler here is what i would do, I always do things the lazy way. 1 place the mud over the glass and level...
i find to help stop print through is to first skin the gelcoat with c-viel and one layer of 1.5 oz mat using vinyalester resin and make sure you...
any one can do it, what I do if Iam regeling a boat is to start by sanding the old gel down with 80grit make sure you wash the boat first and wipe...
add 50 % duratec to the gelcoat and 5% wax and spray a first coat allow to flash then 3 wet coats then fill your gun with airdry wax increase the...
guess Iam a weirdo,
if i was you i put a add on craigslist and try to do a swap, when you cut and rejoin the box make sure you dont over do the glass work, as down...
sounds like you already know what to do
get core bond its made to bond balsacore to glass, its a paste