I have to replace the deck on my sailboat, plywood. I talked to an owner of a repair shop. He thinks I sould replace plywood deck with foam...
I bought a mariner 40 that needs lots of care. The guy that owned it cut the rudder off using a chainsaw. Does anyone know a good shop that...
Can anyone recommend a good fiberglass repair vidio and where to get it. I have mcdugle's vidio. I would like more detailed. thanks
What is the longest sailing adventure you have been on? Where did it start and end!!!
Hello I'm refitting my Mariner 40 and need two aluminum booms 16'9" min and 11'7" min. Also need a replacement velvet drive to go behind a 4-108...
I have a Mariner 40 ketch that I'm refitting. The original mizzen mast boom is about 5' in height from the deck. I am replacing the wooden mast...
I'm refitting my mariner 40. Should I run ground wires from the stays and mast to the bronze thru hull fittings?
Hello I bought a boat with the deck removed. The frame work is still there. I wanted to make a computer drawing before removing the frame work....
Does anyone know about wood wheels made by this company? I looked on internet and can't find any information. I bought it on ebay. It's 24...
I'm looking at inflatables for my boat. Does anyone have experience with these? I'd like to find out which brands are better built. thanks
Hello Has anyone ever used coppercoat on their boats? If so, is it as good as the company say's?
Hello I'm refitting my boat and need a shower enclosure. Does anyone know where might purchase one? I have looked on the internet and haven't...
There is a 50' aluminum mast on ebay right now for $150 in Maryland
Hello The thread on sextants was really interesting, so now I would like to ask about anchoring. I have a 41' ketch, full keel, 26,500 lb...
Hi I'm looking at different sextants, metal and plastic. Is the plastic easier to use because of weight. Or, is the metal one more stable?...
Wanted 38' aluminum mast and boom in good shape for replacement of wooden mizzenmast.
Hello I bought a mariner 40 project boat. The previous owner cut the rudder in three pieces taking it off. Can anyone recommend a shop to...
Hello I have read articals here where it was suggested to use a softwood inner layer, plywood, glass, then teak. Is there anywhere I might find...