Hi all. I am looking at building myself a 4 mtr Rib out of a larger mould that i have borrowed. Has anybody got an idea of what would be a...
I am trying to find a distributor for the pvc or pu fabric used in manufacturing rib (rhib) tubes. Can anyone help??? :confused:
Is deadrise measured at the transom or throughout the hull?
Question.... if i build a 17' fishing boat. the stability of it is good but i think it could be better. if i was to build a channel say 10"...
what is the best additive to add to resin for bulking it up for sanding?
I have made a 1:4 scale model of a 7mtr rib which i want to build early next year. The full size rib will weigh approx 500kg. Should the model...
I am about to take a new mould off one of our existing hulls (to which i own the rights and design). There have always been slight ripples along...
2 Experienced laminators required in Liverpool. 5 mins from Liverpool Airport
I am looking at building 9mtr ribs and am after some assistance on the layup. I was going to lay it up as follows. Gelcoat 300 g csm 300...
i have seen a rib with a gentle convex vee. apart from being stronger, what other benefit would it be? it runs out to a deep vee at the bow.
Hi, Has anybody got any info on the quality/reliabilty of these phoenix apollo Gelcoater/Chopper System? Steve
i own a the moulds for a 16' small fishing boat. the question is Can i make the hull wider and slightly longer, without messing up the way it...
I have come across a number of Brand New Boats (out the same mould) that have all got star cracks on the running surface (the vee) of the hull....
i have asked this question on another site and got mixed answers. what is the flat area on the stern of the keel designed for? i have...
i have just aquired moulds for a 17' 6" fishing boat. i am looking at putting it into production. how thick should the hull be in a chopped strand...
I am looking at getting a Architect to design a new "fast fishing boat" to put into production. I want the hull to be very stable at anchor but...
I am renewing my plastic windows and want to put a wiper kit on the new setup. is there an acrylic or polycarbonate that will not mark when using...
hi everybody. i am looking at putting a new plywood deck in my fibreglass boat. i was going to use birch ply as it seems to be alot flatter...
