Hi, what do you say about biobased epoxies compared to petrolium epoxies in terms of bonding to wood, tensile strenght and fatigue, longevity?...
Hi, in the boat that i am the captain, there are parts that connect spreaders to the mast(as normal:)) as you can see at the "pic1". these...
hi guys , I will just start to work on an aluminium boat as captain. the boat is a "maxi class" boat. normally when i start a job as captain i...
i have an aluminium mast of my dinghy and i need to attach stainless fittings on it by rivets. Before i was using "tefgel" to prevent galvanic...
Hi, I dont have two parts polyurethane paint. Will it be a problem if i use solvent based(naptha) acylic paint over epoxy resin? Regards Ulas
i have a yanmar 2gm20 direct seawater cooling diesel engine. there is a small hole at the elbow of the seawater pump and it is leaking some...
i will put the floor timbers that the foundation of the engine(the frame that engine sits on) is attached by screws. should i use epoxy of...
Hello i was using interdeck as deckpaint. it is a good paint but also needs new painting after two maximum three years. can i use a quality oil...
i have an old yanmar 2gm20. it was leaking oil and i opened the engine for repair. i need to change the piston rings so i will order ring set....
i want to paint the interior of my boat. i made a research in internet and semigloss acrylic latex paint seemed like a good material to me... but...
i have an old wooden boat and sailing around the world. few days ago i discovered a rotten part. it is where the keel meets with planking. i...
i have an old sailboat which is epoxyglassed from outside. i am checking the wood from inside and i have found a badly rotten part where planks...
hello, i have a wooden boat, but inside is quite dark. i want to apply white paint over varnished wood at some parts. i dont want to use toxic...
i lost my propeller while motoring in Caribbean. it is almost impossible to find propeller here but a friend is coming to visit me from USA and he...
i want to paint some parts inside of my boat but i dont know the type of the existing paint. is it ok if i paint with polyurethane paint or do i...
while i was motoring in high RPM with my yanmar2GM i wanted to check the engine as i do regularly. I saw a little smoke and some smell like cable...
The screw hole in the fuel feed pump is stripped. The mechanic says that it is difficult to repair the screw hole so we need to change the pump!...
does it make any problem if i paint the first layer of antifouling black and the second layer red for example? Regards Ulas
does anybody know anything about the Spainish antifouling named "IMNASA". it is quite cheap comparing the well known brands. I was thinking that...
I have a long keel boat with stern hung ruder. My stern tube that the shaft runs through it is leaking. of course the hole that stern tube is in,...