Hi Par, how are you today.? Good Point, I will check out the threads regarding painting today. Can you give an estimated date that the threads...
Hey Par, How is it going.? With regards to the structural of the 23, I guessed after reading your first note that most of the interior...
Hi Tim, I know that applies with paint, Laytex/oil. But didn't realize that Polyester and Epoxy were so different. Polyester is Resin based/oil...
Hello Par, Very good suggestions. Thank you for taking the time to reply. I didn't think that I was so transparent with my sailing experience....
Hi Roy, The K.I.S.S. principle wines out again, that's gratifing. Have fun working on your boat and smooth sailing. ..Ermino
Steve, Good Idea, PVC or ABS could be used. Drill a large hole at top and smaller hole at bottom for screw. This would also allow for drainage....
Mario, Do you think that manufacturing an outside rudder/with tiller as you described with 3M foam would work as well. I own a Islander 24 with...
Roy, How would you get the rubber or leather to not move in the hole.? Also, you will need a roller of sorts to reduce friction and chafing of...
oops. That is I'm now working on.......
Rigging is okay Gonzo, Thanks for your reply. I placed another questionnaire in a different boating forum and received some good information....
I recently purchased an Islander 24. The boat is discontinued. The boat came to me without rigging or material as to how to rigg the boat. Rather...