Epigrip will work well on an epoxy primed surface according to my techie guys, so they advise using Eposeal or a similar coating first. It's good...
I think West Systems work very well provided you are careful when mixing the resin and hardener in the right ratio. We use them all the time for...
T foam is Corecell's T500 polyuerathane core foam - we're using the 50kg/m3 stuff mainly. Never seen it retain water, and not tried it with gas,...
Hi Rich Covering the bottom in epoxy is possible but at this time of year not without it's risks (it can take days to go off in less than 5deg c...
The 1 and 2mm carbon rods are used for fishing floats, model aircraft control rods and very lightweight kite spars amongst other things - but...
I genuinely am not launching this thread to get free publicity, but really am after feedback on what you think our new website www.carbonology.com...
We've been so busy in the factory in the run up to the new year break, and also working on our new website - www.carbonology.com - that we...
I'm going to build 2! An H105 and the 63012 i started a few days ago (almost finished anyway) That way I can interchange them til I'm happy which...
Parameters Here are the key parameters of the class rules and the net outcome I am trying to achieve. I14 class rules only allow 1 lifting...
This is great info Tom... I've got loads of questions and data to compare but I really don't want to hijack the moth design forum that this thread...
i've heard from one of the top moth designer builder/sailors that 4 series foils are stalling above 15kts when there is any risk of cav. He has...
Can I ask a simple question... Why are you using assymetric foils instead of symmetrical ones? Sure a cambered foil is more efficient at...
The rudder blade has the section profile of the foil (at the CL) cut into it and the foil is then bonded and of course secondary bonded......
from talking to friends of mine, some of which went to southampton, and others that went to Newcastle, the big choice for you is whether you want...
I'm just finishing a new hydrofoil for my i14 and need to work out the working range of angle of attack (it has a fully adjustable AofA while...
It looks like a waterproof inspection hatch cover he's putting on to the back tank so not a tube really... But yeah, the triangular ducts are...
Sure... Consider the boat lying on its side, capsized. In an ideal world you want the sails on the water so it stays stable with the centre line...
come to think of it You know Tim, you're right. Come to think of it, I sealed my Lark transom flaps up and didn't use them because when you're...
I am very sorry. I thought your post meant converting to an open transom - ie where there was a transom, the intention is to have an open space....
What about the shorties! [ATTACH]Remember - the amount of fun you have in a boat is inversely proportional to it's length! (remember the things...