Can these relays be used to switch 12vdc or 24vdc loads. The coils are rated for 12 and 24vdc but unsure of the load....
Does the coil of an automotive compressor clutch produce a spark?
I would like to use a 2 colour LED as a backlight to illuminate a circuit label, i want the label to be red when the switch is open and green when...
Does anybody know who makes these switches?
Can anybody help me with a wiring diagram showing how to wire a mute button for a warning buzzer.
I have installed an identical air conditioning system on two aluminium vessels. The system consists of a combination of marine AC parts and...
Does anybody have a fuel flow schematic for a twin inboard engine and twin tank installation.
Does anyone know who makes the fairleads that the RNLI use on their lifeboats?
I have been asked to do some work on a boat when i looked at the wiring diagrams I came across this schematic of the AC wiring. Am i right in...
Is it possible to mount a automotive type relay on a DIN rail?
Im in need of some advice, im doing some work on a Nauticat the stereo has been remove to repair some woodwork, it turns out the speakers are...
I want to charge two 110ah agm windlass batterys from the port engine of a 46ft power boat, i would like to use a BEP Marine voltage sensitive...
I have a yacht which has a US 110vac distribution system consiting of a Freedom 20 inverter/charger, seperate battery charger and a few outlets....
Today i was installing an antenna on a rib when i was asked if i could help a boat owner in the yard with question he had about the same antenne...
Can anyone recommend a type of timber for mounting this engine on, the timber will be bolted to steel and the engine bolted to the timber.
I have just aquired a Heron sailing dinghy, it has had a new deck but it was never painted or vanished. It has been stored out side for a couple...
Would it be cheaper to buy the parts for this and assemble it myself, rather than purchasing a ready made unit, like the ones Mastervolt sell.
Can anyone surrgest a suitable engine to marinize, im looking for around 200-250hp with or without turbocharger.
Does anyone have experiance of using this paint (zinga)
Does anybody have any coments about this kit.