Can these relays be used to switch 12vdc or 24vdc loads. The coils are rated for 12 and 24vdc but unsure of the load....
Does the coil of an automotive compressor clutch produce a spark?
Bert i will be attending the boat show too i work in the industry, why not leave it at the information desk at the show?
Hi Bert Sorry i have been offline for a few days, thanks for the offer of the LED,s and resistors at the moment i am looking into ideas to...
Bert i want to fix one LED in the hole behind the label, the hole will be less than 10mm dia. I have no problem soldering i just dont know...
Would these LED's be more suitable? http://uk.rs-online.com/web/p/indicators/7227833/
CDK could you explain the function of the transistor in the circuit is it some form of a switch?
This post gave me the idea the difference being he is using one green LED module to shine through the clear epoxy, see posts on page three....
Yes, when the boat is used at night switches can be easily identified. LED's will be off when main battery isolator is switched off.
I want to make a small switch panel with 9 switches for various items on a RIB eg nav lights, vhf. I want a way to illuminate the lables for...
Bert thanks again for taking the time to drw and explain various solutions. Would the circiut be simpler if i sourced a 12v LED? I want to...
Thanks for the help Bert These are the LED's i would like to use,...
I would like to use a 2 colour LED as a backlight to illuminate a circuit label, i want the label to be red when the switch is open and green when...
Does the epoxy help to keep the decal inplace, what are the LED you are using?
That helm upgrade looks the buisness, as a matter of interest have you had any problems with those indentification lables coming unstuck?
Is it wise to mix DC and AC on that relay?
The switches are on most of the RNLI Lifeboats, i did wonder if they are purpose made for the RNLI.
Nope nothing there.
Checked almost 3000 products in RS but nothing.
Does anybody know who makes these switches?
