Core cork is being used widely in the yachting industry. We have introduced it as a core material in places where acoustic enhancement is needed....
Paulfish thnks for your advise and PAR as well. I do have a friend who is specialized in Composite (even with cork core) so I hink I can get some...
Yes I will try to keep COG low... I asked for better side pictures and then sketch some additional sheer on it just to see what it looks like.......
Thanks PAR and Sweet ! I might electrify the thing and add a keelbox for batteries.... but I for sure will take a good look at positioning the...
haha yes you are right.... but I do want a little more pleasing to the eye appeal.. and yes, I am Dutch, so it must cost not more then 10 cents......
Thought about that briefly, but I dont like the looks of that. When the freebaord is a low as it is now, it still looks too much like a sailboat....
To keep the people in... to have good seating possibility with good back support, so halfway of ones back and the knees in normal 90 degrees position.
Hi all, I can buy a very cheap 4.75x1.75 m old polyester sail boat hull (see attached picture). I would like to add height to the freeboard (if...
Hi Tomac I do like your design, it is what I have had in mind for years as well. No ultiple curves, just 1 dimensional curves and flat surfaces...
Alright... any suggestion for free plans in that building method ?
Dear all,,, I think you and myself have convinced me of building a stitch and glue Dinghy... I like the D4 for its simplicity and a nice first...
Yes seen them, but they are 4 and 8 years old .. do want some safety so some sideboards. And sure it is quicker to make a punt, but not that much...
Guys, Quick stupid question..... I can get my hands on a free surfboard. How about making some sides to it to sit in it and use it as a...
Thanks ! Yes I did think about the transition of the bow to the sections, maybe extend the keel and add a panel like from bow, then create a cone...
Dear all, It has been a while since I have been here, and still no boat build..... I have got a new idea for hull form, as I am not a naval...
Thanks everyone for the comments... pitty to hear the mundoo express was a fake, looked promissing and simple. as for the hull design for me, I...
Thanks messabout... I have made the hulls to 1:12 now, so a little less volume in the fwd section by drecreasing the max width by 150 mm. I will...
My thoughts of possibilities also came from this link: http://www.duckflatwoodenboats.com/mainpages/mundoo.php See Mundoo express... 2x35 Hp,...
Thank you all for the comments, negative is not necessarily bad, I need to learn from it. The stealth idea was just to highlight the sort of form...
POint taken, but square boats are not necessarily ugly. I should not say square boats, but angled surfaces, a bit like stealth. In order to avoid...