I got some grass stuck over the water intakes on my 1980's Suzuki 85. I did not hear the alarm going off over the noise from the motor until the...
I have started a little contest between several builders of the minimax and minimost type hydroplanes to see who can make the fastest boat and...
My father bought the 85 Suzuki new in the early 1980's. It is a 3 cylinder oil injected 2 stroke. The motor has farly low hours on it and is on a...
I have a mold for a 12' kayak. I made a boat in it a few weeks ago using three layers of 1 1/2 oz mat and polyester resin. The top fits like a...
I have made my plug in thin plywood for a kayak and am almost ready to complete fairing it out and coating it in it's final coat. I have used...
I have started a radio controlled boat making business. I have built the pictured plug out of plywood from scratch and decided that after I make...
This boat is not mine and I have no interest in it's sale. It's owner gave me good advise when I built one. He has listed it for sale on ebay....
I have a kayak molds set for sale. It makes a boat 12' long that has a drop in molded seat. It is for a smaller person of about 140 lbs or less....
I have started making my own plugs for molds for deep V model boats for a radio controlled boat dealer. A regular problem with these hulls per the...
I have started making plugs for molds for a deep V remote control boat for a large retailer of these hulls. I will make them and he will sell...
I need someone that can hand lay fiberglass and operate a chop gun to assist make my airboat hulls. My current guy is very good but fails to show...
I bought this set last year and have not had time/money to try and get it and my build method certified by the USCG. I am selling the mold set to...
I bought a jet ski trailer that had a jet ski on it on ebay. It is a mid 90's Kawasaki 900 with the motor and electronics removed. The hull is in...
I bought a few molds that were used with Chemlease #15 Mold release. I tried to use PVA on them and it fisheyed badly so I cleaned off the PVA and...
I am building the X1 cabover hydroplane from the plans found on svensons.com web site. I have three of the five frames done and have been looking...
I want to build a pickle fork style hydroplane, 12' - 13' long. The only one I have found is the 9' plans Glen-L sells. It is way to small for me....
i need a short shaft outboard (s) for projects I am working on. Must be in good working condition, 9.9 to 40 hp reasonable price and close to...
I just got my 27' Chris Craft home so I can start work on the engines. It filled up with rain water from the Hurricaines last year and was left...
I am making a fiberglass kayak in a two part mold. The top and bottom mold each make a part that meet each other all the way around (No overlap)....