Funny!!! Didn't Richard post this last week too??...let me dig up the URL he he....and Richard, you never did send that gent's email address who...
I would enjoy some input on my idea. I have an Endeavor 32 with a centerboard. She draws 3'6" board up and 7' board down. The regular keel version...
Could any of you tell me what the beam at waterline is for a single hull on a seawind 24? I am building a plywood boat of my own design and......
hello, need some help with measures Could any of you tell me what the beam at waterline is for a single hull on a seawind 24? I am building a...
I am researching a 40 ft sailing ctamaran with flat bottom hulls and a hull length to beam ratio of 17 to 1 I will have very small curtains about...
Jimslade who make these 200$ machines?
Jimslade, I would do that because if you look closely you will note that the amperage on the twelve volt side is only 8 or 10 . I know it does...
Can you be a little more specific about what you saw and tell me how a soldered joint/ inexpensive wire will lead to death?
The angle of pivot of the rudder does not have to parrallel the transom. Also, The biggest advantage to me is the ease with which one can make a...
My original point in all of this was to discribe how I had made a fully functional generator and electrical system that has lasted a good amout of...
I apologize, I did a very cursory puruesal of the regs and I was only looking at one part pertaining to generators, you never did answer my...
Please read in depth description in the very first post of this thread. It is mounted on deck but not to the deck. It does not matter if it is...
I admit the stress riser and spoke of it in first post. I just do not see how that much vibration can exsist on a sailboat. I do not have a...
"Each time there is critizism of any of your claims, you say it was sarcasm" Incorrect, I wrote that I looked at regulations you mention and...
I was incorrect! The baseline (to compare my setup with) is a wire without any goop from the soldered terminal to the insulation. Do you disagree...
What I wrote: "I am a poor person, happily so." What you wrote about it: "He says he's poor and seems quite proud of it" Happily and...
Gonzo, you are incorrect as I just looked and those regs apply only to "permanently mounted " AND electrically started gensets! If you read...
I NEVER admitted that Yatch ownership is not for the poor! (see definition of sarcasm)You are totally incorrect! I do not "opennly admit...
Blatant disregaurd for safety? please explain! I am very safe!
Wow hahaha You know absolutely nothing about my boat or how the genset is on the boat, yet you make all manner of moral proclamation! it is...
