I am working on a slighter larger console than my previous mini console. Main question is if I am better off making a one piece mold or split......
Wondering if anybody has some thoughts on the varying depths of sing engine cat pods. In the examples below some go all the way to the same depth...
Hey all, I am again designing a new little boat and I am having a hard time nailing down information on outboard bracket size. I know there is a...
Hi all... I did a good bit of googling last night but could not find any info on this question so here goes! I have been laying up some small...
Hi all, I thought this was interesting and really do not know why this happens. I tested two different brands of gelcoat on a brand new mold that...
Hi All, I am perplexed at a very expensive and time consuming mishap that has trashed a 12 foot mold. The mold came out great, however after...
So I have a mold for a part that I have pulled 8 or so parts from... all going perfectly. Currently I apply one coat of wax before each part....
Hi all... Having read up on this subject in previous posts on this forum, other forums, websites, videos, ect.... I have never read the same thing...
Taking my first try at modeling a boat. It was a learning curve to figure out lofting but I am getting decent results now. I still seem to have...
In terms of building a fiberglass boat... can one be built straight off of the plug? Obviously that will mean a ton of sanding and fairing in...
Hey all, always read this forum and learned a whole lot from it! I spent a few hours designing a model of center console skiff...ish boat. In the...
