Need to know if this is a bad idea. I have given up on my resin infusion/vacuum bagging for my 11’ canoe project. I’ve got a heavy tandem canoe...
If 3 ozs of epoxy has a pot life of 60 minutes, is there a way to determine pot life for larger quantities, with temperature and container shape...
I am fixing to infuse my 12' canoe mold. Yes, this has been "going to infuse my 12' canoe mold" for quite some time now. It has been recommended I...
Tomorrow I will finally infuse the 12' canoe I have been working on for years. I'm going to preheat the mold and I want to elevate the temperature...
The company I purchased the resin said 25 minute working time. The directions on the can say 15 minutes. This has me a little concerned. I will...
MAX GPE epoxy gel coat is available at a good price and seems easy to use. Has a long pot life. A Google search yields nothing. This site, since a...
When the time comes to infuse, I plan to have a center vacuum point with my resin line running around the perimeter of the mold. I chose this...
I started working on a canoe mold 15 years ago. Moved, lost my work space, and put the project on hold. Now I am back on the project and will be...
Can anyone recommend an epoxy-based gel coat? I have found one and it only comes in red. Thanks...Alan
I've tried to research this but can't find much out there. I have a female canoe mold that I am wanting to add a colored topcoat to the final...
Looking for spray adhesive alternatives to 3M 77. I have seen several references to resin-based alternatives, but no mention of product names....
Hi: I am at the point of adding a spine to my 12' female canoe mold. Just a few questions. Should the spine be made primarily of...
Hi: I have a resin infusion question. I am in the process of infusing a male canoe mold. I understand that the resin bucket needs to be...
I fret about infusing my 12' male canoe mold. Now I feel better! alan
Hi: I am using the MGS System 335 epoxy in a resin infusion setup. I am trying to find a balance between pot life and gel set time....
