I think you are asking how to bond two pieces that have already cured.
Well the best way is to have used peel ply against your carbon lets say....
Well Tunnels your technic worked out great. I tried spraying automotive clear coat in the Chemtrend released mold again the way you described...
I stand corrected!
I tried spraying a coat of clear coat into the prepared mold and it would not lay down. It fished eyed so bad that it...
Its one thing to find the leak around the tacky tape seal but what if the leak is somewhere over the many square feet of the bag? Can...
I have a doctors stethscope but find it hard to find to find really small leaks.
Have any of you guys used these ultrasonic leak detectors for vacuum bagging? What do you think of them ? Are they worth the money?
Report on Chemlease
I did talk to their company rep about silicone in the product. He said that in the early days silicone migration to the part...
Thanks for the history.
I have contacted the manufacturer stating the silicone concerns. I will post the reply.
The person that steered me to this produce was a chief composite fabricator for a formula one team. I trust what he says. You may be right...
I did have a slight worry about silicone migrating to the part but the sales tech rep says that it chemically cures so as it is inactive...
Report on trial use
Well Tunnels I did use this product and It worked fantastically for me.
I almost felt guilty that the part came out of...
I am about to try this technic and was wondering if any of you guys have used this system. If you type in the title in YouTube you can see...
I searched for the right tackifier for a whole year. I did find the proper stuff that becomes one with epoxy and does not restrict the infusion...
Do any of you know who would supply the right latex to make your own bladders. I have searched without success.
Have any of you guys had any experience with this stuff?
Is the bladder a special type of latex or is latex latex.
Not yet. I will let you know after I use it.
Your right! Why risk it! I will order the cleaner from Freemans this week.
I just contacted my supplier about the cat %. He said that yes 1% is a starting off point and that yes up to 2.7% is also Ok.for gelcoat....
Can I just use prime wash instead of chemlease mold cleaner. I assume that they are both just silicone and wax removers. (primewash is what...
It was on the suppliers label but they aren't the manufacturer of the resin.
I will ask them about that ratio.
I have noticed...