If I understand correctly, this is the same as the tornado sport rig in the picture below?
I would likely have a furling and...
I have scoured the internet but cannot find any good pictures of the forestay setup you are referring to on the sl16. Would you have a...
There are constraints also with sports cars... Not unlike limboing under a boom
that is indeed food for thought! And also a large thank you for the long thread on multihull structure! It has kept me company...
I am designing catamaran. First some outline details before the key question just to set the scene.
I will need to fit it inside 9*3,5m,...
Most of it does absolutely consist of Farrier geometry, but the amas are articulated vs the beams, meaning in folded position, they are still in...
Very intrigued by the folding systems shown for the new M&M Rapido 40 & 50
How does that work?
Locking in place for sailing and...
Having RTFM, there is no obvious way to change what you are looking for.
If you have not yet googled it, RTFM is what people say when tired of...
Almost cross posting from "Michlet 9.33 released", in case there are members looking out for Flotilla as LP above. Is there anything in...
Hi, think this will be found in the manual, in the Doc directory.
it is Transverse and Diverging wave resistance.
If Leo is reading, hope your...
Have you possibly done your base caser CFD using a symmetry plane and therefore only see the results for half a hull?
Running michlet in the cloud
I have had some success in running Michlet on the free tier Amazon ec2 cloud service with microsoft server 2008...
Thank you Leo
Any news on next release of Flotilla ?
Compatibility modes solves part of this
Trying michlet and godzilla using the compatibility (XP or Vista) modes has, at least for me,...
Elapsed time 0,32948E+2 seconds
i5-3360M @ 2,8GHz
Off to play with this the whole weekend :)
Thanks, i was refering to sheave dia vs rope dia (sheave width)
The area of use for such sheaves would be on small multihulls, where loads,...
If this is true, are not a large amount of blocks, also from renowned manufacturers, significantly too wide? I seem to en up with wire blocks...
If I don't read the magic wheel PDF wrong, it is in some cases designed with a constant diameter on the line you pull with your...
I was thinking of a overlapping jib (more than the 5% possible with selftacking W shaped rail)
I saw a winchless solution...
The magic wheel?
This is a quite old thread, but I have been looking for answers to the same question.
When searching I came across...