An unbiased review;
I visited Phoenix Spray Equipment recently on my way through Florida (hilariously, I showed up at their factory with another...
Center console. Console had a step down bed and head inside. We built 1 a week. Compsys/PRISMA stringer & bulkhead system.
Straight 24 oz WR is half the price of combi WR. It’s lighter weight to ship, and is less prone to shear if bedded in wet chop. It’s easier to...
1.5 oz CSM
1.5 oz CSM (3x)
1.5 oz CSM
4mm coremat (sub 1/2” foam core if...
Whatever you can do with chop strand mat, you can do with a chopper gun.
Get a high ratio pump (15:1 or more) if you can, then you can use it...
shoot me a message, I’ll at least give ya a bid.
Magnum Venus is out of Kent, WA.
There’s five main companies in production for plural component airless spray equipment;
MVP (Magnum Venus...
where are you located?
It’ll still wet out. Use it for non critical bulking.
Anyone have a Binks GW laying around that you want to get rid of?
Shoot me a message.
why not just wet out your scraps and use them on a project? We used to do that monthly at a boatbuilder I worked for.
It's been done before ; ECO-WOLF, INC. - FRP & Natural Fibers Recycling System https://www.ecowolfinc.com/frp.php
they sell a macerator to grind...
2 lb pour foam in some cavities would be a cheap & effective way to connect the hull bottom to the floor to enhance stiffness. Just throwing it...
Glass is cheap, it’s resin that’s expensive.
There's quite a bit involved. Pretty much all has been answered.
Nice to see an SC guy, I'm over in Summerville.
Everywhere. The white streaks are entrained air.
Unless leaks are dealt with promptly, they tend to be trapped behind the resin front.
Bag leaks caused bubble accumulation in spots.
If a laminate that thin is getting heat distortion, your skin coat is massively undercured.
At 85F, I usually run about 2.25% MEKP9 @ 90 mils...
It’s going to get hot as heck spraying. You need some type of cooler and drier.
I have used about 25 ft of 3/8 copper line in a bucket...
Use gel extender. Spray at night or early morning. Prep everything, use a drill mixer when introducing MEKP. Try to mix, insert, close pot,...