Ive ordered some Tygon hose for pump to carb
Ill let you know if Ive solved the problem once I've put the boat in the water
Hi Barry And Missinginaction,
Thank you both for clearing that up for me
My flame arrester has the fitting on it above the secondary bores
Just confirming clear tygon tubing is used for vacuum line from mechanical fuel pump to carburettor vacuum port
Also what is the diameter...
I definitely will Missinginaction
I've ordered new filters and a marine mechanical pump
I've also decided to replace the spark plugs
Once it all done I'll drop the...
Great thanks for clarifying that
Just a quick question
The small hose size of the carburetor vacuum today fuel pump is very small
Are there hose clamps this small
Thank you Missinginaction and kapnD great advice from you both
Ive decided to replace the mechanical fuel pump on my chev 350 while fixing the above problem
I've relised that the existing pump is not...
Thanks for your replay
Ive not used E10 in it
Fuel doesn't get a chance to sit in the tanks long as I'm a keen fisho and get out a lot...
Thanks for your reply
My tanks don't have the anti siphon valve but I'm now going to put them in
I had to replace the pump awhile back...
Thank you jehardim
I will make that my first job
Sorry should have read
At one point I tried to hold the revs up to see if the engine would come good but it just surged really badly and WOULDN'T rev
Its been awhile since I have posted on here
Just to recap ive got a 21foot fibreglass tralier boat with a smallblock chevy 350...
Ok so I am having gear shifting problems,
I'll run over the background that has lead to this
I had a Mercruiser MC1 that I up graded to a...
Ive had a really good look at the transom plate and can't see anywhere this wire would go
Sorry to be a pain but could you provide...
Are there any other continuity wires that need to be connected in this area to complete the circuit
Ive had a quick look online at a few pics...
Ill let you know how I go
I will have a look tonight after work