Hi All, I want to show you the capabilities of the program Maxsurf Stability on the following links:...
Hi SBCnaval, I shall try to help you. With Rhino always drawings are made more easy and fast. For that make the following: 1. Make in Rhino,...
Hi dear naserrishehri, It is necessary to share problems into two separate: 1. Calculation of the freeboard 2. Calculation of the intact...
Hi All, I think that the most good program while it is Maxsurf Stability Enterprise, version 20, Dec 17 2013. On Picture its capabilities are...
Design of Yacht Mast What it is necessary to make the professional projecting a mast for yacht to convince the surveyor of Classification...
Hi All, To calculate efforts acting on the mast of a sailing yacht and to construct it / to pick a profile of cross section, length, to bracing...
Analysis of condition and development of program Orca3D I track the program Orca3D since the first day of its occurrence. Since then till today...
I have made one more check: I has tested at so chosen stability criteria how much can to be the maximum allowable value VCG for full...
Hi All, Obviously that Tansl any more have not remained other arguments, but he does not want to recognize that has written not quite considered...
Dear Tansl, Thanks for advisories and kind wishes, but I insist that you knew, that I was not worse than you or what - be other ship-building...
Hi Tansl, Let's see what is really made till now. You have tried to help Alex, but your experience was unsuccessful - your model on Maxsurf has...
Approximate calculation of the intact stability Hello all, I have made approximate calculation of the intact stability. Outcome is very good. I...
Hi guys, I am sure that some from readers of the forum understanding Russian better and are hindered with English. For all of you which prefer...
Likely there will be a question - what for in the ultimate view there are so many surfaces? Because the model is made on program Delftship...
Greetings guys, I am very glad for positive responses about my work. I see that in the forum already there are people understanding those that I...
Hi Sreenath, Your question is incomplete! Надо уточнить следующее: 1. Если это существующая баржа - с каким объемом располагаем для размещения...
Hi Alex, I hope that this model to like you and will help you to realize your idea. If professional advices how to prolong work are necessary...
Hi Mark Fisher, It was difficult to trust that on the length of the aluminum mast there is no any welding provided that a diameter for the deck...
Hello All, This time I shall to quote myself: I shall add only, that coordinates lower and peak points of masts which I have shown, determine...
Hi appusree 888, That you do not speak about computer model means that again the question is remodeling an existing ship what the case your...
