yea 4m2 will easly do it. it will only need one join in the middle. i hope it is quite easy to work with bending into curvs and such.
after some research i found that polyurethane degrades over time so scrap that. i finaly found a new zealand supplier of 8mm honeycomb and am...
i have been looking at cores and now think foam is proberly a better idea. is it possible to have a core too thick? i have found a quite...
yea apparently this stuff is real easy to form once wetted out. I can get it for $11 m2.
yea i can buy a boat for 10k. i dont mind if the boat comes out 18kg or so. there is a 25 year old german boat at our rowing club and that is...
yea i wish i had more money but i cant afford $750 of carbon and the boat will proberly only be used for training anyway. excluding the deck
no i dont think so. if i use a piece of cloth 0.5m x 8m (surface area 4m2) i need to cut of lots of glass.
Hey i calculated my boats surface area and it is about 2.8m2 ( i gave a little) so with four layers for 200g glass and resin the hull would weigh...
thanks i think i will use a core but i am having trouble finding one in New Zealand. do any of you know about 2mm-5mm Matiline coremat or 3mm-22mm...
Thanks Rick I think i will stay with my original design. The design is pretty mutch a copy of the fisa designed hull which is pretty mutch all...
Hi Guys. I am building a single scull and i have never worked with fibreglass before and had some questions. my boat is going to be 8m long and...
