Seakeeping:Ship Behavior in Rough Weather by A R J M Lloyd is a very good reference book that tackles many aspects of seakeeping including design...
There is a good reference on how to calculate the total resistance of a barge that takes into consideration the bow shape and hull surface;...
As your boat might be a plain hull without any stiffener, it's quite easy just to apply first principles approach. First, find the mechanical...
Does anyone care to explain how a boat can be made self-righting? I read a lot of lifeboat nowadays which has this self-righting capability and...
Hi babri, Thank you for your suggestion. Tried using the ghs but no matter how I tried, the heel is always forced to zero. The only solution I...
Hi, Is there anyone knows how to produce a table of hydrostatic Properties at a designated heel angle in Autohydro? Been looking high and...
This is from GHS website. Not sure if it is applicable for autohydro; New Oil Fuel Tank Protection Regulation OUTFLOW Compliance OUTFLOW...
Hi Fast Fred, Thank you for your reply. Unfortunately, the links that you've provided doesn't help much as the size of stuffing boxes that I'm...
Can someone kindly help me on where I can find the sizing table for the water-lubricated stuffing box as given in the attached file. I'm looking...
Are u trying to perform IMO wind criteria? Maybe if you can post the syntax (command) concerned here and I'll take a look into it. When I upgraded...
I do not have the softcopy nor a scanner with me at the moment. Perhaps, if you google and get lucky enough, you might find a few pages of it.
The autohydro manual is very simple and it doesn't help much, in my opinion. Better look for the program's help files and the sample files. That's...
probably the tank capacity itself isn't big enough to achieve the equilibrium at the given draft of 4.2m. Check the displacement at 4.2m and...
There is a good example on these topics that can be found in Autoship's User Guide, Tut. 2, 2.10. Adding a forward deck with Camber and Sheer...
"Check" the Window in the "View and Output Scale" msg box and use your cursor to pick up the whole Kiosk. You shall be able to print out then....
The curve looks like two curves being placed together to me, otherwise the porcupine quill should be spaced evenly along a single curve. You may...
I tried it just now. Seems to be working perfectly for me. The only thing matter is when A'ship asks to split the object at corners which will...
SNAME's Ship Design & Construction Vol.1 Edition 2004, Chapter 17 Structural Arrangement and Component Design has some very good references on it....
Follow this links; http://www.bodrum-bodrum.com/vorteks/arsenal/feacodes3.htm http://www.bodrum-bodrum.com/vorteks/arsenal/feacodes.htm...
